We designed the experiment, from which it is possible to identify the hardening curve in the plastic deformation, which is far above the local instability in uniaxial tensile test.
The paper focuses on a reliable identification of the hardening curve of sheet metal after the onset of necking by means of a purposely developed shear test. The main comparative advantage of the test is its simple implementation needing no further development of the experimental equipment used in standard tensile testing. In addition, in order to achieve more flexible hardening curve description from those given by the classical analytical hardening laws, the paper presents the hardening curve approximation based on the cubic spline technique. The identified hardening curves are validated and compared to the analytically extrapolated ones obtained by a continuation of classical hardening laws for large plastic strain. It is shown, that due to large difference in response the analytical extrapolation is seriously disputable.
VRH, Marko, HALILOVIČ, Miroslav, ŠTOK, Boris. Characterization of mechanical behaviour of sheet metal: hardening at large strains and anisotropy identification. V: MENARY, Gary (ur.). Esaform 2011, (AIP conference proceedings, vol. 1353). Queen's University: Belfast, 2011, str. 1441-1446.